MMMC-66844

3M™ Trizact™ cloth belt 217EA uses our proprietary micro replication technology where micron graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a J-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish. For intermediate finishing and fine polishing prior to plating or buffing. controlled breakdown for consistent finishing. The abrasive and resin structure for the 3M™ Trizact™ cloth belt 217EA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. This belt also features a grinding aid that helps prevent heat buildup, warping and discoloration. The belt is constructed on a J-weight, durable cloth backing that helps provide control, conformability and effective medium pressure grinding. The resin bonded abrasive provides heat resistance and helps prevent delamination. Runs smooth, finishes consistently. A film media splice minimizes chatter marks and ensures smooth running and consistent results. When compared to conventional abrasive products, proprietary Trizact™ abrasives produce a finer finish, achieve results faster and last longer.

Trizact™, 5111166844, Belt, Fullflex Narrow Scalloped Edge, 132 in Belt Length, 2 in Belt Width, A65 Grit, Very Fine Grade, Rayon Backing, Tan, Applicable Materials: Aluminum, Brass, Bronze, Copper, Mild Steel, Stainless Steel, Titanium, Cobalt and Nickel Alloy, JE-Weight Backing Weight, Dry Wet/Dry Operation

• Self-sharpening pyramids start sharp, stay sharp and run cooler than conventional abrasives
• Flexible backing flows over contoured surfaces for consistent finishing
• Ideal for light pressure applications, allows abrasive to break down and maintain cut and produce consistent finishes
• Produces finer finishes than conventional electrostatically coated abrasives
• For intermediate finishing and fine polishing prior to plating or buffing

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_046719_82276_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_046719_82276_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Trizact_051111_66832_SDS.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Trizact_051111_66832_SDS.pdf