SPERRY-VC61000

This heavy-duty, multi-function tool is a must-have for installations and troubleshooting with its ability to indicate voltage levels, test continuity and allow non-contact AC voltage detection. The Sperry Instruments VS61000 Volt Check Voltage Continuity Tester Smart Meter automatically turns on and adjusts to the required application without needing to adjust any dials. The integrated Circuit Alert technology for non-contact AC voltage detection uses the only button found on the test unit. Magnets molded into the back of the unit hold the tester in place while you use the leads. The versatility of this tester, combined with the 10-foot drop rating and 250-pound crush rating, make it one of the most durable, accurate and safe electrical probes on the market today. CAT IV 600 V/CAT III 1000 V rated. Limited-lifetime warranty included for extra performance assurance.

Sperry Instruments Volt Check™ Voltage Continuity Tester, 26 in Lead Length, LED Light Source, LED, AAA Battery, (3) AAA Batteries Supply, Environmental Conditions: 5 deg C to 40 deg C (5 to 104 deg F), Max Relative Humidity 80% to 31 deg C (88 deg F) decreasing linearly to 50% Relative Humidity at 40 deg C (104 deg F), Yellow

• Indicates AC/DC voltage, continuity, DC polarity and non-contact AC voltage presence
• Circuit alert non-contact AC voltage detection in tip (50 to 600 VAC)
• Twin Probes for 24 to 600 VAC, 6 to 220 VDC with polarity indication or continuity
• Smart Meter Technology automatically selects voltage or continuity test, no adjustment dials or range selection necessary
• Snap-in leads are spaced to fit a standard outlet for one hand operation
• 26 in Sta-Flex cold weather leads with strain reliefs

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Sperry_Instruments_ET6102_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Sperry_Instruments_ET6102_Catalog.pdf