SIM WA624124SS

A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All® wedge anchor is available in carbon steel with zinc or mechanically galvanized coating, as well as Types 303/304 and Type 316 stainless steel. Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.

Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 5/8 in Dia, 4-1/2 in Overall Length, 2-7/8 in Thread Length, 303/304 Stainless Steel, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 15/16 in Head, 1699 lb Shear Strength, 1475 lb Tensile

• Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
• One-piece, wrap-around clip ensures uniform holding capacity
• Threaded end is chamfered for ease of starting nut
• 18-8 stainless steel nut/washer/clip
• The minimum concrete thickness is 1-1/2 times the embedment depth
• The allowable loads are based on a safety factor of 4
• 11/16 in minimum fixture hole
• 90 ft-lb installation torque
• 8720 lb ultimate and 1620 lb allowable shear load
• 1015 lb at 2000 psi and 1935 lb at 4000 psi allowable load tension

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Simpson_Strong_Tie_WA11200_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Simpson_Strong_Tie_WA11200_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Simpson_Strong_Tie_WA112003SS_Technical_Bulletin.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Simpson_Strong_Tie_WA112003SS_Technical_Bulletin.pdf