SIM AT-XP10

Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP® adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-installation identification.

Simpson Strong-Tie® Strong-Rod™ Acrylic Adhesive, High Strength, Series: AT-XP®, Coaxial Cartridge Container, 9.4 oz Container, Acrylic Glass Base, Composition: (Resin Teal Side)-Portland Cement, Calcined Clay, Ethoxylated Bisphenol-A Dimethacrylate, Propylidynetimethyl Trimethyl Trimethacrylate, Crystalline Silica, Quartz, Tetrahydrofurfuryl Methacrylate, (Initiator White or Tan Side)-Dibenzoyl Peroxide, White Mineral Oil, Titanium Dioxide, Kaolin, Silicon Dioxide, Liquid/Paste Form, 24 hr Curing, Teal/Tan/White, 1.58 Specific Gravity, >200/159 deg F Flash Point, 0.4173611111 Mixing Ratio, 30 g/L VOC, Applicable Materials: Grouted Concrete Block, Cracked Concrete, Dry/Water Saturated Concrete and Masonry

• Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
• 10:1 two-component high strength, acrylic-based anchoring adhesive
• Easy hole cleaning procedure no power-brushing required
• For best results store between 14 to 80 deg F
• Cures in substrate temperatures as low as 14 deg F in 24 hrs or less
• Threaded rod anchoring and rebar doweling into concrete and masonry
• Suitable for horizontal, vertical and overhead applications
• Surfaces to receive adhesive must be clean
• Base material temperature must be 14 deg F or above at the time of installation
• For best results, material should be 14 to 80 deg F at time of application
• To warm cold material, store cartridges in a warm, uniformly heated area or storage container
• Do not immerse cartridges in water to facilitate warming
• Mixed material in nozzle can harden in 3 to 4 min at temperatures of 70 deg F and above
• Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie® instructions
• Modification or improper use of mixing nozzle may impair AT-XP® adhesive performance
• 12 months shelf life from date of manufacture in unopened container
• Compatible with CDT10S dispensing tool/AMN19Q mixing nozzle

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Simpson_Strong_Tie_AT_XP10_SDS.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Simpson_Strong_Tie_AT_XP10_SDS.pdf