SGS 32606

V-Carb™ end mills set the standard for peak finish quality. These 5-flute, unequal helix tools feature unequal indexing and an ideal rake and relief combination for unmatched finishing capability. Available with a full selection of corner radii and ball nose configurations, the V-Carb™ portfolio is well equipped to handle your complex finishing requirements.

SGS® End Mill, Center Cutting High Performance Positive Rake Single End, Series: V-Carb™ 55CR, 1/8 in Diameter Cutter, 0.01 in Corner Radius, 1-1/2 in Overall Length, 1/4 in Length of Cut, 5 Flutes, Right Spiral Flute, 1/8 in Shank Diameter, Right Hand Cutting Direction, 45 deg Helix Angle, Straight Shank, 1-1/4 in Shank Length, Solid Carbide, AlTiN

• Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
• The choice when peak finish quality is the requirement
• Enhanced corner geometry with tight tolerance corner radii
• Recommended for materials <= 45 HRc (<= 420 Bhn)

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_66784_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_66784_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_RoHS.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_RoHS.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_SDS.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_SDS.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_74649_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_74649_Specification_Sheet.pdf