MMMS-14781

Scotch-Brite™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

Scotch-Brite™, 7000077967, Flap Brush, Series: FF-ZS, 3 in Wheel Diameter, 1.75 in Face Width, 1/4 in Shank Diameter, Fine Grade, Aluminum Oxide Abrasive, 8500 rpm Maximum, 1/4 in Center Hole, Center Hole Attachment

• Achieves decorative finishes on metal, wood, and composites
• Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
• Provides more surface contact than bristle-type brushes
• Continuously supplies fresh abrasives for consistent, uniform finishes
• Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch-Brite_7100307446_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch-Brite_7100307446_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch-Brite_7010329803_Installation_Manual.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch-Brite_7010329803_Installation_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch_Brite_7100062947_SDS.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch_Brite_7100062947_SDS.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch_Brite_7000077967_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Scotch_Brite_7000077967_Specification_Sheet.pdf