RUS 261998

Rust-Oleum® Flexible Joint Sealant is a two-component, rapid curing, 1:1 ratio, self leveling, 100% solids, flexible system that provides 10-15% movement of installed joint width. This product can be used at temperatures between -40 to 120 deg F (-40 to 49 deg C). Flexible Joint Sealant is used to fill interior control joints or new construction saw cuts on horizontal concrete surfaces. It is designed for industrial floor applications receiving heavy duty vehicle traffic. Flexible Joint Sealant can be used for interior expansion joints with the maximum joint width not to exceed one inch. It can be used on exterior applications when minimal joint movement from thermal cycling will occur. Joints can be opened to traffic in 90 minutes at 72 deg F (22 deg C).

Rust-Oleum® Flexible Joint Sealant, 2-Component, Cartridge Container, 9 oz Container, 5.5 sq-ft Coverage, 1-1/2 hr Drying, 1-1/2 hr Curing, Part A: Amber/Part B: Gray, -40 to 120 deg F, >200 deg F Flash Point, 1.72 g/L VOC, Applicable Materials: Concrete

• Convenient cartridge format, no mixing required, includes static mixing nozzle
• Self-leveling formula creates a semi-rigid surface with over 80% elongation
• Flexible joint sealant is a two component, rapid curing, 1:1 ratio, 100% solids, flexible system that provides 10 to 15% movement of installed joint width
• For interior/exterior use, can be applied at -40 deg C, withstands temps to -120 deg F
• Joints must be clean and dry prior to application
• Used to fill interior control joints or new construction saw cuts on horizontal concrete surfaces
• It can be used on exterior applications when minimal joint movement from thermal cycling will occur
• 18 months shelf life
• 80% elongation
• Can be applied down to -40C
• 90 min light traffic dry time, 12 to 16 hrs heavy traffic dry time