AGSE RAD64002672

Radnor® Nozzle, Recessed Thread-On, Series: 23 Series, For Use With: Radnor® Pro 250, Radnor® Master 250, Radnor® Master 350, Radnor® 400, Radnor® Pro 450, Radnor® Master 400, Tweco® No. 3 and Tweco® No. 4 MIG Gun, Specifications: 5/8 in Bore, Copper, 3.219 in L Dimensions

• Easy identification part no rolled stamped on the outside surface
• 3-piece design does not require an additional insulator
• Nozzle housing cut and formed from 122 DHP copper alloy tubing
• Nozzle insulator made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
• Nozzle insert machined from a solid brass allow and machining the internal threads to match the conductor tube OD threads
• 3-piece nozzle design, includes nozzle housing cut and formed from 122 DHP copper alloy tubing
• Recessed tips are generally used for higher heat applications where longer electrical stick out is required or in cases where the nozzle may touch the workpiece (tack, spot and stitch)
• Flush tips are generally used where a shorter electrical stick out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the workpiece
• Protruding tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint
• However the down side-to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace