Contact 800-639-2901

Powermatic® 1792002K JET-PM23130K
  1. pin-int

JET-PM23130K

Powermatic® 1792002K PM2000 Cabinet Table Saw, 10 in Dia Blade, 5/8 in Arbor/Shank, 2-1/8 in 45 deg Capacity, 3-1/8 in 90 deg Capacity, 3 hp, Tool Only

  • Manufacturer: JPW Industries
  • Brand Name: Powermatic®
  • Part Number: JET-PM23130K
  • MPN: 1792002K
  • UPC: 662755878954
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Reynolds & Son, Inc - So Barre

Powermatic® Table Saw, Cabinet, Series: PM2000, 10 in Diameter Blade, 5/8 in Arbor/Shank, 45 DEG Capacity: 2-1/8 in, 90 DEG Capacity: 3-1/8 in, 4300 rpm Speed, Cutting Capacity Rip Left: 13-1/2 in, Cutting Capacity Rip Right: 50 in W, 22 x 30-1/2 in, 42 x 30-1/2 in Extension, 63-1/2 x 30-1/2 in Full Extension Table, 13/16 in Maximum Width of Dado, 8 in Maximum Diameter of Dado, 3 hp, 230 V AC, 13 A, Cast Iron Housing Material

45 DEG Capacity      :      2-1/8 in
90 DEG Capacity      :      3-1/8 in
Amperage Rating      :      13 A
Arbor/Shank Size      :      5/8 in
Blade Diameter      :      10 in
Cutting Capacity Rip Left      :      13-1/2 in
Cutting Capacity Rip Right      :      50 in W
Horsepower      :      3 hp
Housing Material      :      Cast Iron
Maximum Diameter of Dado      :      8 in
Maximum Width of Dado      :      13/16 in
Series      :      PM2000
Speed      :      4300 rpm
Table Size      :      22 x 30-1/2 in, 42 x 30-1/2 in Extension, 63-1/2 x 30-1/2 in Full Extension
Tool/Kit      :      Bare Tool
Type      :      Cabinet
Voltage Rating      :      230 V AC
  • Quick release riving knife greatly reduces binding/kickback risk
  • Built-in retractable caster system for immediate shop mobility
  • Arbor lock for rapid blade change
  • Poly-V drive belt system delivers efficient, quiet operation
  • Wide stance heavy duty trunnion for stability and smooth blade positioning
  • Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts
  • Industrial-duty Accu-Fence® System ensures accurate cuts
  • Enclosed cabinet with cast iron base for rigidity
  • Heavy duty deluxe micro-adjust miter gauge with aluminum extruded 13 in extension fence, for good workpiece support and fine angle adjustments
  • Precision ground, high luster, cast iron table top with front edge bevel for hassle-free workpiece positioning
  • Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up
  • Saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated
  • 34-1/2 in table height from floor, 4 in dust port outside diameter
  • 3/4 x 3/8 in table T-slot
  • 1 phase motor
  • 30 A recommended circuit size
  • 11-1/4 in table in front of saw blade at maximum depth of cut
  • 350 dust collection minimum cfm required