PH-48F-6-4

Parker®, 48F-6-4, Tube to Pipe Connector, Economical, Series: 48F, Fitting/Connector: Adapter, 3/8 in x 1/4 in x 5/8-18 Nominal, Tube x Flare Straight Male NPTF End Style, 5/8 in Hex, 1.42 in Length, 2800 psi Pressure, -65 to 250 deg F, Brass, Domestic

• Economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out
• Easy to disassemble and may be reassembled repeatedly, for a leak proof connection
• Manufactured from CA 360, CA 345 or CA377 brass
• Manufactured especially for hard-to-hold liquids and gases
• Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared
• Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications
• The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety
• Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical
• Forged nuts for refrigeration applications
• Long nuts for vibration
• For refrigerant lines, propane lines, fuels, natural gas, oil burners and adapters applications
• Fluorocarbon o-ring
• 0.282 in Dia flow