PH-159F-8-8

Parker® Tube to Pipe Elbow, Economical, Series: 159F, Fitting/Connector Type: 45 deg Elbow, 1/2 in x 3/4-16 Nominal, Tube x 45 deg Flare Straight MNPT, 2800 psi, -65 to 250 deg F, Brass, Domestic

• Economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out
• Easy to disassemble and may be reassembled repeatedly, for a leak proof connection
• Manufactured from CA 360, CA 345 or CA377 brass
• Manufactured especially for hard-to-hold liquids and gases
• Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared
• Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications
• The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety
• Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical
• Forged nuts for refrigeration applications
• Long nuts for vibration
• UL listed for flammable liquids
• For refrigerant lines, propane lines, fuels, natural gas, oil burners and adapters applications
• Fluorocarbon o-ring
• 0.407 in Dia flow