Contact 800-639-2901
MOR-30953
Onyx 30953 2102M General Purpose Spiral Flute Tap, Right Hand Cutting, M14x1.5 Thread, D6 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Bright, HSS
- Manufacturer: Morse Cutting Tools
- Brand Name: Onyx
- Part Number: MOR-30953
- MPN: 30953
- UPC: 686125309534
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at Reynolds & Son, Inc - So Barre
- Sold As: 1/PK
-
Price:
Onyx Spiral Flute Tap, General Purpose, Series: 2102M, Measurement System: Metric, M14x1.5, Semi-Bottoming Chamfer, 3 Flutes, HSS, Bright, Class of Fit: D6, Right Hand Cutting, 0.69 in Thread Length, 3-19/32 in Overall Length, Right Hand Flute Direction
| Chamfer Type | : | Semi-Bottoming |
| Class of Fit | : | D6 |
| Cutting Direction | : | Right Hand |
| Finish/Coating | : | Bright |
| Flute Direction | : | Right Hand |
| Material Application | : | Non-Ferrous Materials |
| Material | : | HSS |
| Measurement System | : | Metric |
| Number of Flutes | : | 3 |
| Overall Length | : | 3-19/32 in |
| Series | : | 2102M |
| Thread Length | : | 0.69 in |
| Thread Limit | : | D6 |
| Thread Size | : | M14x1.5 |
| Type | : | General Purpose |
- Reduce neck design and shorter thread length for increased coolant flow to the cutting edge, enhanced chip evacuation and reduced contact between tap and workpiece
- For tapping a wide range of materials up to 28Rc hardness
- Bright finish for tapping a wide range of materials including non-ferrous materials
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth