Contact 800-639-2901
MORSE® Forming Tap, Straight Flute, Series: 2105G, Measurement System: Imperial, 1/4-20, Ground/UNC, Plug Chamfer, 1 in Thread Length, 2-1/2 in Overall Length, 4 Flutes, Right Hand Cutting, Class of Fit: 3B, #1 Tap Drill, HSS, TiN Coated
| Chamfer Type | : | Plug |
| Class of Fit | : | 3B |
| Cutting Direction | : | Right Hand |
| Finish/Coating | : | TiN Coated |
| Material | : | HSS |
| Measurement System | : | Imperial |
| Number of Flutes | : | 4 |
| Overall Length | : | 2-1/2 in |
| Series | : | 2105G |
| Tap Drill Size | : | #1 |
| Thread Length | : | 1 in |
| Thread Limit | : | H4 |
| Thread Size | : | 1/4-20 |
| Thread Standard | : | Ground/UNC |
| Type | : | Straight Flute |
- Thread forming taps cold form rather than cut the threads
- Advantages include no chips to dispose of stronger higher quality threads, increased tapping speeds, longer tap life and reduced tap breakage
- Recommended for a wide variety of ductile materials
- Lube grooves provide a path for lubrication and act as vents to relieve pressure in blind hole tapping
- Plug style (4 threads tapered) for through holes and blind holes with adequate depth
- The longer taper lead is easier starting, requires less torque, produces less burr above the mouth of the tapped hole and increases tool life
- Titanium nitride (TiN) coating results in an extremely hard surface with high lubricity for increased tool life, improved thread quality, reduced torque and increased tapping speeds for greater productivity
- Ground Thread
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/MORSE_96450_Catalog.pdf