DIXV-DDC100SS

Mann-Tek by Dixon® Coupler Hose Unit, Dry Disconnect, Series: Mann Tek, Coupling Fitting/Connector, 1 in Nominal, Coupler x FNPT End Style, 115 mm Length, 360 psi Pressure, 316 Stainless Steel, 78 mm Dia Dimensions, Domestic

• Coupler has built-in swivel
• Shaft journal in stainless steel embedded in PTFE to eliminate seizure
• The protective ring is a specially formulated, weather resistant and electrically conductive rubber compound
• Selectivity - to avoid product contamination, selective versions of the couplers and adapters are available
• Easy to handle - push and turn - free flow, turn and pull - closed
• Time saving - no need to drain hoses or pipe systems
• Economical - no loss or spillage of liquids at connection or disconnection
• Safety - the valve cannot be opened until the unit is coupled
• Environmental friendly - accidental spillage eliminated when properly used
• Safe and reliable - due to rugged construction
• Product life - uncomplicated design and high quality materials ensures long product life
• Use with composite (Polyeten PE-HD 300) plugs for protection against corrosion; plugs withstand hot and cold environments
• Stainless steel ball bearings
• All wetted parts are stainless steel
• Rollers are Hastelloy C276 on the stainless steel shaft
• Working pressure is based on psi at ambient temperature 70 deg F, for pressure ratings at other temperatures contact Dixon
• Compatible with Mann-Tek, Avery Hardoll and Todo-matic® and any other product produced according to NATO standard STANAG 3756
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_DDC075AL_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_DDC075AL_Catalog.pdf