DIXV-DDA100BR

Mann-Tek by Dixon® Adapter Tank Unit, Dry Disconnect, Series: Mann Tek, Adapter Fitting/Connector, 1 in Nominal, Adapter x FNPT End Style, 76 mm Length, 230 psi Pressure, Brass, 55 mm Dia Dimensions, Domestic

• Conical valve seat reduces the risk for piston blow out
• PTFE bearings between the piston shaft and the piston guide eliminate the risk for seizure
• Easy to handle - push and turn - free flow, turn and pull - closed
• Time saving - no need to drain hoses or pipe systems
• Economical - no loss or spillage of liquids at connection or disconnection
• Safety - the valve cannot be opened until the unit is coupled
• Environmental friendly - accidental spillage eliminated when properly used
• Safe and reliable - due to rugged construction
• Product life - uncomplicated design and high quality materials ensures long product life
• Selectivity - to avoid product contamination, selective versions of the couplers and adapters are available
• Use with composite (Polyeten PE-HD 300) caps for protection against corrosion; caps withstand hot and cold environments
• Brass and stainless steel internal parts
• Working pressure is based on psi at ambient temperature 70 deg F, for pressure ratings at other temperatures contact Dixon
• Compatible with Mann-Tek, Avery Hardoll and Todo-matic® and any other product produced according to NATO standard STANAG 3756
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_DDA075AL_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_DDA075AL_Catalog.pdf