JET-321890

The ZX-Series Large Spindle Bore Lathe provides power, precision, efficiency, and reliability to your metal shop. A one-piece cast iron base absorbs vibrations during operation to allow heavier cuts and ensure accuracy, while the universal gearbox eliminates the need to change gears. This lathe also features a 10” three jaw scroll chuck with top reversing jaws, and an e-stop on the carriage for increased operator safety. Features you've come to expect in a JET Lathe that is backed by the industry-leading JET Two Year Warranty.

JET®, JT9-321980, Engine Lathe, Series: ZX Series, 22 in Swing Over Bed, 13 in Swing Over Cross Slide, 80 in Distance Between Centers, 13-1/8 in Bed Width, #5 Morse Taper Tailstock Taper, #7 Morse Taper (#5 Morse Taper) Spindle, 25 to 1800 rpm Spindle Speed, 12 Spindle Speed, 12 in Cross Travel, 5 in Tailstock Spindle Travel, 74-5/16 in Carriage Travel, 5-1/8 in Compound Travel, 0.0006 to 0.0365 in Maximum Cross Feed Rate per Revolution, 0.0015 to 0.0913 in Maximum Longitudinal Feed Rate per Revolution, 10 hp, 230/460 V AC, 136 x 45 x 71 in Dimensions

• 3-1/8 in bore spindle is supported by two tapered and one ball bearings
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Universal gear box allows inch, metric, diametric and module pitch threads, no change gears required
• Carriage features one shot lubrication and turcite-B on bed sliding surfaces
• T-slotted compound slide featuring four-way tool post
• One piece cast iron base absorbs vibration allowing heavier cuts
• High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
• Removable gap allows large diameter work
• Five position automatic carriage stop increases productivity
• Attractive chrome levers, dials and knobs complete this impressive package
• Provides power, precision, efficiency and reliability to your metal shop
• 10 in 3-jaw scroll chuck with top reversing jaws, 12 in 4-jaw independent chuck and 16 in face plate
• Features four-way tool post, follow rest, large capacity steady rest, full length splash guard and coolant return
• Fully integrated coolant system and meehanite castings
• Large easy to use foot brake, articulating halogen work lamp, centrally located controls with jog button
• Features threading dial, mounting pads/levelers and comes with tool box as well as adjusting tools
• 122 longitudinal/cross feed rates
• 24 metric threads
• 1 x 1 in max tool size
• 29-1/2 in swing through gap, 22 in swing over bed, 0.05 - 2 metric threads, 3/8 - 7-3/4 in steady rest capacity, 61 number of inch threads, D1-8 spindle mount, 1/2 - 3-1/2 in follow rest capacity, 3-1/8 in spindle bore, 1-5/8 - 72 TPI, 22 in x 80 in size, 12 in length, 230 V prewired