JET-111000

Jet® SSC series electric hoists combines safety and durability to operate in commercial and industrial applications. All models incorporate a slip clutch overload protection mechanism that prevents the hoist from lifting damaging loads above its rated capacity. They are available in single or three phase configurations to suit your electrical needs. Single phase models have a thermal overload protection design that keeps the hoist from overheating, while the three phase models feature a reverse phase relay that protects the hoist from incorrect wiring. The industry proven DC electro-magnetic brake increases safety by holding the load even when power is interrupted. The maintenance free gear train incorporates a sealed oil bath, for reliability and durability.

JET®, JT9-111000, Electric Chain Hoist, Series: SSC, 1 ton Load, 8 x 24 mm Chain/Rope, 10 ft Lifting Height, 19.7 fpm Lift, 24-7/16 in Minimum Between Hooks, NEMA 4X Pushbutton Control Pendant, DC Electromagnetic Brake, 1-3/4 hp Power, 115/230 V AC, 20.8/10 A, 24-7/16 in Headroom, 161 lb Weight, 21.65 in L x 18.11 in W x 15.35 in H Dimensions

• Overload protection - slip clutch design prevents the hoist from lifting damaging loads above its rated capacity
• Thermal overload protection - protects the hoist from overheating in low voltage situations
• An industry proven safety feature that secures the load even if power is interrupted to the hoist
• Limit switches - upper and lower limiting switches increase safety by preventing the load chain from over traveling
• Sealed gear train - maintenance free gear train incorporates a sealed oil bath that eliminates upkeep
• Grade 80 load chain - grade 80 black oxide coated load chain for durability
• Control pendant- 24 V push button controller with cable strain relief system for durability and reliability in industrial and commercial settings
• All steel construction - fully enclosed, all steel plate construction with a durable powder coat finish keeps out moisture, dust and debris lengthening the life of the hoist
• H3 duty rating
• 25% duty cycle
• Heavy duty ventilated motor with thermal overload protection or reverse phase protection
• Equipped with heavy duty chain container
• Quick-connect wiring for power and push button controls
• Upper and lower limit switches prevent over-travel
• Single phase models feature thermal overload protection
• Easy to install, inspect and maintain

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/JET_112000_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/JET_112000_Specification_Sheet.pdf