Contact 800-639-2901
Dynabrade® Wet Rotary Sander, Basic, Tool/Kit: Bare Tool, 5 to 8 in Pad, 0 to 3100 rpm, 0.7 hp, 41 scfm, 90 psi Air, 1/4 in NPT Air Inlet, Rear Load Exhaust Location, Lever Throttle, 3/8 in Minimum Hose Size, Composite Housing, Right Angle/Soft Grip, 80 dB, 13 in L x 3-1/8 in H
| Air Flow Rate | : | 41 scfm |
| Air Inlet | : | 1/4 in NPT |
| Air Pressure | : | 90 psi |
| Dimensions | : | 13 in L x 3-1/8 in H |
| Exhaust Location | : | Rear Load |
| Handle Type | : | Right Angle/Soft Grip |
| Horsepower | : | 0.7 hp |
| Housing Material | : | Composite |
| Minimum Hose Size | : | 3/8 in |
| Pad Size | : | 5 to 8 in |
| Sound Level | : | 80 dB |
| Speed | : | 0 to 3100 rpm |
| Throttle Style | : | Lever |
| Tool/Kit | : | Bare Tool |
| Type | : | Basic |
- Basic Model runs 5 in (127 mm), 6 in (152 mm) or 8 in (203 mm) diameter polishing pads
- Pads sold separately
- Without pre-assembled hook-ups for those not requiring through-the-tool water feed (for those who prefer to use a hose or spray bottle)
- Accepts variety of abrasive products including wet or dry discs, non-woven-nylon surface conditioning discs and film backed discs
- This prevents build-up of sanding residue on the disc, allowing the tool to be used efficiently in any position
- Water is fed through the center of pad directly to the work surface, providing optimum flushing of work surface and pad
- Rear exhaust muffler reduces noise levels
- Conventional rotary action with lubricated gears
- High torque air motor has variable speed
- Safety-lock throttle and soft-grip handle (adjusts to left or right hand)
- Center water feed prevents build up of sanding residue on the disc
- 5/8-11 male spindle thread
- Accepts variety of abrasive products including wet or dry discs, Scotch-Brite® surface conditioning discs and film-backed disc