DIXV-RDL400EZ

Dixon® Cam and Groove Coupler, Series: EZ Boss-Lock™, Coupling Fitting/Connector, 4 in Nominal, Coupler x Class 150 Flange End Style, 6-19/32 in Length, 100 psi Pressure, 316 Stainless Steel, Domestic

• 11 in open across cam arm
• No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged, no sliding pins to jam or pop open
• Extremely easy to open, the release lever is under your thumb when you want to open the fitting, ergonomic
• Resistant to accidental disconnection when dragged
• The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm
• Rotating action helps keep the locking devise free of debris
• Designed to protect critical parts from impact and to withstand rugged use
• Flanges are designed to mate with 150 lb flange
• Produced to interchange with all product produced to commercial item description A-A-59326D
• If the rotating lever is not flush with the handle, it is not properly engaged
• Produced as a welded fabrication construction
• Flange has raised face
• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Under no circumstances should the EZ boss-lock cam arms be used on any fitting not specifically designed for their use
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_RDL400EZ_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_RDL400EZ_Catalog.pdf