1. pin-int

DIXV-FL64-Z

Dixon® FL64-Z Holedall™ Long External Swage Ferrule, 4 in ID x 4-30/64 to 4-39/64 in OD Nominal, Carbon Steel, Hose End Style, Domestic

  • Manufacturer: Dixon Valve & Coupling
  • Brand Name: Dixon®
  • Part Number: DIXV-FL64-Z
  • MPN: FL64-Z
  • UPC: 089109849543
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Reynolds & Son, Inc - So Barre

Dixon®, FL64-Z, External Swage Ferrule, Long, Series: Holedall™, 4 in ID x 4-30/64 to 4-39/64 in OD Nominal, Hose End Style, Carbon Steel, Domestic

Domestic/Import      :      Domestic
End Style      :      Hose
Material      :      Carbon Steel
Nominal Size      :      4 in ID x 4-30/64 to 4-39/64 in OD
Series      :      Holedall™
Type      :      Long
  • The coupling system requires no bolts and results in a clean coupling with no protrusions
  • The holed all coupling provides long lasting efficiency and safety
  • Style FL ferrules are extra long and are used with all long style external swage stems - TML, TGL and TPL styles
  • The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
  • Dixon® holed all stems and ferrules are specifically designed to be used together as a coupling system
  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon® holed all products
  • Do not use a wrench or vice on ferrule
  • Holed all couplings, regardless of coupling style, are never to be used for steam service at any pressure
  • Holed all fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
  • Externally swaged holed all couplings, to perform satisfactorily, must be applied properly in accordance with Dixons assembly procedures, using correct die and ferrule for that particular hose end OD
  • Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
  • Media being transported through the hose should be compatible with the stem material
  • Compatibility of ferrule material with the environment in which it will be used is recommended
  • Do not use in connection with drinking water
  • Wash hands after handling