1. pin-int

DIXV-F20-3

Dixon® F20-3 Holedall™ Standard External Swage Ferrule, 1-1/4 in ID x 1-57/64 to 2 in OD Nominal, Carbon Steel, Hose End Style, 2-7/8 in L, Domestic

  • Manufacturer: Dixon Valve & Coupling
  • Brand Name: Dixon®
  • Part Number: DIXV-F20-3
  • MPN: F20-3
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Reynolds & Son, Inc - So Barre

Dixon® External Swage Ferrule, Standard, Series: Holedall™, 1-1/4 in ID x 1-57/64 to 2 in OD Nominal, Hose, 2-7/8 in Length, Carbon Steel, Plated, 2-3/8 in Dia, Domestic

Dimensions      :      2-3/8 in Dia
Domestic/Import      :      Domestic
End Style      :      Hose
Finish      :      Plated
Length      :      2-7/8 in
Material      :      Carbon Steel
Nominal Size      :      1-1/4 in ID x 1-57/64 to 2 in OD
Series      :      Holedall™
Type      :      Standard
  • The coupling system requires no bolts and results in a clean coupling with no protrusions
  • The holedall coupling provides long lasting efficiency and safety
  • Style F ferrules are used with all standard length external swage stems - TM, TMR, TP, TPR, TG and TGR styles
  • The selection of ferrules is very important to achieve proper coupling-to-hose assembly
  • Dixon®holedall stems and ferrules are specifically designed to be used together as a coupling system
  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon®holedall products
  • Do not use a wrench or vice on ferrule
  • The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
  • Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
  • Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon®s assembly procedures, using correct die and ferrule for that particular hose end OD
  • Dixon®s die and ferrule recommendation guide is to be used to select correct dies and ferrules
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
  • Media being transported through the hose should be compatible with the stem material
  • Compatibility of ferrule material with the environment in which it will be used is recommended
  • Do not use in connection with drinking water
  • Wash hands after handling