Contact 800-639-2901

Dixon® 32P3SO15 DIXV-32P3SO15
  1. pin-int

DIXV-32P3SO15

Dixon® 32P3SO15 Holedall™ External Swage Fixed Flange, 2 in ID x 2-49/64 to 2-56/64 in OD, Carbon Steel, Domestic

  • Manufacturer: Dixon Valve & Coupling
  • Brand Name: Dixon®
  • Part Number: DIXV-32P3SO15
  • MPN: 32P3SO15
  • UPC: 089109822904
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Reynolds & Son, Inc - So Barre

Dixon® Fixed Flange, External Swage, Series: Holedall™, 2 in ID x 2-49/64 to 2-56/64 in OD Nominal, 1 in Thickness, Carbon Steel, 6-5/8 in, Domestic

Dimensions      :      6-5/8 in
Domestic/Import      :      Domestic
Material      :      Carbon Steel
Nominal Size      :      2 in ID x 2-49/64 to 2-56/64 in OD
Series      :      Holedall™
Thickness      :      1 in
Type      :      External Swage
  • 150 lb ASA flange drilling
  • The Holedall coupling provides long-lasting efficiency and safety
  • The coupling system requires no bolts and results in a clean coupling with no protrusions
  • Carbon steel stem, ferrule and flange
  • Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system
  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products
  • Do not use a wrench or vice on ferrule
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
  • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
  • Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
  • Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
  • Media being transported through the hose should be compatible with the stem material
  • Compatibility of ferrule material with the environment in which it will be used is recommended
  • For applications other than the ones list, please consult Dixon
  • Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
  • Do not use in connection with drinking water
  • Wash hands after handling