DIXV-24PFX1.937

Dixon® Sanitary Flow Chief Ferrule, Internal Expansion, 1-1/2 in ID x 1-56/64 to 1-59/64 in OD Nominal, 304 Stainless Steel, Domestic

• Ferrule does not have serrations on the ID
• Ferrule sizes are designed in increments of 1/16 in
• Consult maximum working pressure chart or contact Dixon® for additional application and working pressure information
• Flow chief internal expansion (IX) fittings are only to be used with flow chief stainless steel ferrules
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Strict adherences to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• For applications other than the ones list, please consult Dixon®

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_IXSE24-3A_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_IXSE24-3A_Catalog.pdf