DIXV-13MHHM800SN

Dixon® 13MHHM800SN Single Pin Heavy Duty Clamp With Serrated Wing Nut, 8 in Tube, 25 in-lb Load, 304 Stainless Steel, Domestic

Dixon® Heavy Duty Clamp, Single Pin, 8 in Tube, 25 in-lb, 304 Stainless Steel, Domestic

Wing nut tightened to 25 in-lb of torque
Pressure rating 100 psi at 70 deg F, 50 psi at 250 deg F
Service pressure ratings are based on the following parameters: matching elastomer gasket and weld ferrules properly aligned and assembled with the clamps tightened to required torques, tests are done hydrostatically with no water hammer or shock loads
Please note the pressure ratings of the described unions may be above the recommended pipe line operating pressures

https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_13MHHM800SN_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_13MHHM800SN_Catalog.pdf