Contact 800-639-2901

DeWALT® PFM1411080 DEW PFM1411080
  1. pin-int

DEW PFM1411080

DeWALT® PFM1411080 Heavy Duty Screw Anchor, 1/4 in Dia, 2-5/8 in OAL, Hex Washer Head Drive, Steel, 1 in D Min Embedment

  • Manufacturer: Stanley Black & Decker
  • Brand Name: DeWALT®
  • Part Number: DEW PFM1411080
  • MPN: PFM1411080
  • UPC: 075352304939
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Reynolds & Son, Inc - So Barre

The Screw-Bolt™+ anchor is a 1-piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.

DeWALT®, PFM1411080, Heavy Duty Screw Anchor, 1/4 in Diameter, 2-5/8 in Overall Length, Hex Washer Head Drive, Steel, 1 in Minimum Embedment Depth, 1/4 in Drill, Zinc Plated, Applicable Materials: Concrete/Lumber/Masonry, 21/64 in H Head, 1-5/8 in Maximum Work Thickness, 1755 lb Shear Strength, 2955 lb Tensile Strength

Applicable Materials      :      Concrete/Lumber/Masonry
Diameter      :      1/4 in
Drill Size      :      1/4 in
Finish      :      Zinc Plated
Head Drive Type      :      Hex Washer
Head Size      :      21/64 in H
Material      :      Steel
Maximum Work Thickness      :      1-5/8 in
Minimum Embedment Depth      :      1 in
Overall Length      :      2-5/8 in
Shear Strength      :      1755 lb
Tensile Strength      :      2955 lb
Type      :      Heavy Duty
  • Designed for standard ANSI tolerance drill bits
  • Low installation torque in concrete and masonry
  • Ratchet teeth on underside of hex washer head lock against the fixture
  • Fully removable and reinstallable in same hole
  • Diameter, length and identifying marking stamped on head of each anchor
  • Patented thread design offers toughened threads for tapping high strength concrete
  • Universal product for concrete and grouted/solid masonry
  • Can be installed closer to a free edge than traditional expansion anchors
  • Fast installation with powered impact wrench, but can also be installed manually
  • One piece, finished head design