Contact 800-639-2901
POR-9290C
Crescent® 9290C Center Cut Light Duty Pneumatic Cutter, 1/2 in Cutting, 16.2 to 18.7 cfm Flow Rate, 90 to 130 psi Operating
- Manufacturer: Apex Tool Group
- Brand Name: Crescent®
- Part Number: POR-9290C
- MPN: 9290C
- UPC: 037103924988
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at Reynolds & Son, Inc - So Barre
- Sold As: EACH
-
Price:
The H.K. Porter 9290C Pneumatic Cutter, Center Cut, Heavy Duty is a made-in-the-USA cutter used in the wire-shelving industry. It cuts soft, medium or hard materials with center cut jaws and the cutting is controlled by manual pressure.
Crescent® Pneumatic Cutter, Center Cut Light Duty, Bare Tool Tool/Kit, Cutting Capacity: 1/2 in, 16.2 to 18.7 cfm, 90 to 130 psi Operating, Back D-Handle, 17-1/2 in L x 3-3/4 W, Applicable Materials: Low Carbon Steel, High Carbon Steel, High Alloy Steel, Stainless Steel, Aluminum, Brass and Copper
| Applicable Materials | : | Low Carbon Steel, High Carbon Steel, High Alloy Steel, Stainless Steel, Aluminum, Brass and Copper |
| Cutting Capacity | : | 1/2 in |
| Dimensions | : | 17-1/2 in L x 3-3/4 W |
| Flow Rate | : | 16.2 to 18.7 cfm |
| Handle Type | : | Back D-Handle |
| Operating Pressure | : | 90 to 130 psi |
| Tool/Kit | : | Bare Tool |
| Type | : | Center Cut Light Duty |
- Heavy-duty workhead has 5 in bore (127mm) and 3 in stroke (76mm)
- Cuts soft, medium, or hard materials
- Cutting controlled by manual pressure
- Filter-lubricator units recommended in air supply line for longest tool life
- No exhaust shock
- NEVER use any H.K. Porter cutters on energized circuits, wire, or cable