POR-0290FCS

Face the storm with confidence with Crescent H.K. Porter's line of Fiberglass Cable Cutters. Featuring grips that are specifically designed for multiple cutting positions, ultimately reducing fatigue and enhancing control. H.K. Porter blades are forged and machined in the USA with precision heat treatment which allows for longer blade life. The jaw pivot geometry has been optimized for a lower force to cut over the tool's life. Cut soft materials (31HRC) up to 1/2" or 13mm thick, medium materials (42HRC) up to 7/16" or 11mm thick, and hard materials (48HRC) up to 3/8" or 10mm thick with the 30" fiberglass bolt cutter.

Crescent® Hand Operated Cutter, Lightweight, 500 kcmil Copper, 750 kcmil Aluminum, 1-3/8 in Communications Cable, 25-1/2 in Overall Length, Forged Alloy Steel Jaw, Shear Cut Type, Straight, Fiberglass Handle, Aluminum, Copper and Communication Cable Material Application, No, No Spring Return, Steel, Yellow

• Grips specifically designed for multiple cutting positions, allowing for full body leverage and one-handed cuts, reducing overall fatigue
• Cuts Blades are forged and machined in the USA with precision heat treatment for longer blade life or aluminum, power and communications cable
• Industrial sized fiberglass handles for increased strength and cutting leverage
• Optimized jaw pivot geometry for lower force to cut over tool life
• Improved locking plate and nylon locking nuts design minimizes bolt loosening and reduces the need for retightening
• Screw adjustment for realignment as needed
• NEVER use any Crescent H.K. Porter cutters on energized circuits, wire, or cable
• Cuts soft material (31HRC) up to 1/2 in or 13mm thick, cuts medium materials (42HRC) up to 7/16 in or 11mm thick, cuts hard materials (48HRC) up to 3/8 in or 10mm thick