REX-CUT 730003

Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.

Browning® Pillow Block Roller Bearing Unit, Heavy Duty Type SR, Series: PBE920, 1-7/16 in Bore, 5 to 6 in Bolt Center-to-Center Length, 1-7/8 in Base to Bore Centerline, 7-3/8 in Overall Length, 3 in Overall Width, 3-3/4 in Overall Height, Two-Bolt Base Mounting, Round/Tapered Bore, 2-1/8 in Base Width, Double Set Screw Collar Locking Device, Contact Seal, Non-Expansion (Fixed) Expansion, 4760 lb Dynamic Load, -20 to 200 deg F, 3000 rpm Maximum, Cast Iron, Gray Painted

• Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
• Single lip contact face-riding seals rotate with the shaft
• Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
• Powder coat epoxy 2-bolt cast iron housing

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_764056_Installation_Manual.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_764056_Installation_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_730000_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_730000_Specification_Sheet.pdf