TITEBOND 1416

Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.

Browning® Spiral Miter Gear, Finished Bore Left Hand, 1 in Bore, 1:1 Gear Ratio, 21 Teeth, 7 Diametral Pitch, 3 in Pitch Diameter, 0.68 in Face Width, 2-1/2 in Diameter Hub, 7/8 in Hub Projection, 1-25/32 in Overall Length, 20 deg Pressure Angle, 1/4 x 1/8 in Keyway, Hardened Steel

• Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
• Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears
• Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_YSB20B1020_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_YSB20B1020_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_A175382_Warranty.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_A175382_Warranty.pdf