MMMR-08661

3M™ clear super silicone seal is a paste like, one component clear material that cures to a tough, rubbery solid when exposed to moisture in the air. Our silicone seal adheres to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces and many plastics. 3M™ clear super silicone seal is excellent for general purpose bonding and sealing, as well as formed in place gasketing applications. It will adhere to most clean, bare or painted metal surfaces, glass, non-oily wood, abraded rubber and many plastics. The versatility of this silicone makes it a practical choice throughout a vehicle. Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our clear super silicone seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ clear super silicone seal is formulated to hold up when exposed to these conditions. Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste like consistency makes it easy to tool with a spatula or wooden paddle. Super silicones cure from the outside in. At conditions of 75 deg F and 50% RH, they form a tack free skin within 20 min. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.

3M™, 7000028606, Super Silicone Sealant, Tube Container, 3 oz Container, Composition: Siloxanes and Silicones, Di-me, Hydroxy Terminated, Silica, Solvent Refined Hydrotreated Middle Distillate, Methyltriacetoxysilane, Ethyltriacetoxysilane, Polydimethylcyclosiloxane, Decamethylcyclopentasiloxane, Octamethylcyclotetrasiloxane, Paste Form, 24 hr Drying, 24 hr Curing, Clear, -76 to 400 deg F, 1 Specific Gravity, >200 deg F Flash Point,

• Sealant cures to a tough, rubbery solid when exposed to moisture in the air
• Versatility allows for use throughout an automobile
• Adhesive properties offer high resistance to weathering, vibration, moisture, ozone and extreme temperatures
• Rapid-curing clear silicone seal offers excellent adhesion